Abstract Details
Abstracts
Author: Richard Fitzpatrick
Requested Type: Poster
Submitted: 2023-03-16 13:51:02
Co-authors:
Contact Info:
Institute for Fusion Studies, UT Austin
Dean Keaton & Speedway
Austin, Texas 78723
USA
Abstract Text:
The locking of the 2/1 tearing mode to the resistive wall in the ITER tokamak (15 MA inductive scenario 2) is investigated theoretically using a cylindrical asymptotic matching model. The model takes into account the fact that ITER plasmas will effectively besurrounded by two walls; the inner blanket module layer with a time constant of about 23 ms, and the outer vacuum vessel with a time constant of about 380 ms. The model also takes cognisance of the fact that neither the blanket module layer nor the vacuum vessel can be accurately described as `thin' walls (in the ordinarily accepted sense). The model incorporates changes in both the plasma poloidal and the toroidal angular velocity profiles, in response to the electromagnetic braking torque that develops at the rational surface, because it turns out that neoclassical poloidal flow-damping is not strong enough to completely suppress changes in the poloidal velocity. Finally, the model accurately calculates changes in the poloidal and toroidal plasma angular velocity profiles by evolving the full angular equations of motion, taking the electromagnetic braking torque, plasma inertia, plasma viscosity, and poloidal flow-damping into account. The time required for the 2/1 tearing mode to grow from a small amplitude to one sufficient to lock to the walls is found to be about 3.5 s. The critical full radial island width at which wall locking is triggered is found to be about 9% of the plasma minor radius.
Comments: